Dell Studio 1536 Service Manual Download Page 35

Page: 35 / 41

Great user manuals database on

UserManuals.info

Back to Contents Page

Optical Drive

Dell™ Studio 1535/1536 Service Manual

Removing the Optical Drive

Follow the procedures in

Before You Begin

Remove the palm rest (see

Removing the Palm Rest

Remove the three screws on the optical drive and take out the optical drive from the bay.

Replacing the Optical Drive

Connect the optical drive connector to the system board.

Replace and tighten the three screws on the optical drive.

Replace the palm rest (see

Replacing the Palm Rest

Removing the Optical Drive Interposer

Follow the procedures in

Before You Begin

Remove the palm rest (see

Removing the Palm Rest

Remove the three screws on the optical drive and take out the optical drive from the bay.

Pull out the optical drive interposer to remove it.

optical drive

screws (3)

Summary of Contents for Studio 1536










































Search results

Summary of Contents for Studio 1536

Reviews:

Related manuals for Studio 1536

Brands by name

Popular brands

Dell Studio 1536, Service Manual

Search results

Summary of Contents for Studio 1536

Reviews:

Related manuals for Studio 1536

Brands by name

Popular brands