Dell Studio 1536 Service Manual Download Page 37

Page: 37 / 41

Great user manuals database on

UserManuals.info

Back to Contents Page

Palm Rest

Dell™ Studio 1535/1536 Service Manual

Removing the Palm Rest

Follow the instructions in

Before You Begin

Remove the base cover (see

Removing the Base Cover

Remove the eight screws from the bottom of the computer.

Remove all Mini-Cards (see

Removing the Mini-Card

Press and remove any ExpressCard or media card.

Remove the display assembly (see

Removing the Display Assembly

Remove the eight screws on the palm rest.

Remove the touch pad, fingerprint reader, and speaker connectors from the system board.

CAUTION:

Before you begin the following procedure, follow the safety instructions that shipped with your computer.

NOTICE:

Do not use force to separate the palm rest from the computer. If you encounter resistance, gently flex or apply pressure to the palm rest, or

move along the edge, working away from the area of resistance, until the palm rest is free.

Summary of Contents for Studio 1536










































Search results

Summary of Contents for Studio 1536

Reviews:

Related manuals for Studio 1536

Brands by name

Popular brands

Dell Studio 1536, Service Manual

Search results

Summary of Contents for Studio 1536

Reviews:

Related manuals for Studio 1536

Brands by name

Popular brands