Dell Studio 1536 Service Manual Download Page 14 | Manualshive

Page: 14 / 41

background image

Great user manuals database on

UserManuals.info

Back to Contents Page

Processor Thermal-Cooling Assembly

Dell™ Studio 1535/1536 Service Manual

Removing the Processor Thermal-Cooling Assembly

1.

Follow the instructions in

Before You Begin

.

2.

Turn the computer over and remove the base cover (see

Removing the Base Cover

3.

In sequential order (indicated on the thermal-cooling assembly), loosen the four captive screws on the thermal-cooling assembly processor cover.

4.

Loosen the two captive screws on the thermal-cooling assembly sink.

5.

Disconnect the thermal-cooling assembly fan cable from the connector on the system board.

6.

Remove the screw from the thermal-cooling assembly fan and take out the thermal-cooling assembly.

Replacing the Processor Thermal-Cooling Assembly

1.

Align the four captive screws on the processor thermal-cooling assembly processor cover with the screw holes on the system board and tighten the
screws in sequential order.

2.

Tighten the two captive screws securing the thermal-cooling assembly sink to the system board.

3.

Replace and tighten the screw to secure the thermal-cooling assembly fan to the system board.

4.

Connect the thermal-cooling assembly fan cable to the system board.

5.

Replace the base cover (see

Replacing the Base Cover

).

Back to Contents Page

CAUTION:

Before you begin the following procedure, follow the safety instructions that shipped with your computer.

1 thermal-cooling assembly sink

2 fan cable

3 thermal-cooling assembly processor cover 4 thermal-cooling assembly fan

CAUTION:

Before you begin the following procedure, follow the safety instructions that shipped with your computer.

«
...
12
13
14
15
16
...
»

Summary of Contents for Studio 1536










































Reviews:

No comments

Related manuals for Studio 1536

Brand: EAI Pages: 132

Brand: Acer Pages: 25

HC10 - BladeCenter - 7996

Brand: IBM Pages: 114

Brand: Casio Pages: 143

Core 100 Series

Brand: ASROCK Pages: 4

Brand: ASROCK Pages: 58

AvalonMiner 1066

Brand: Canaan Pages: 19

Brand: Shuttle Pages: 24

Brand: Teknion Pages: 458

Kontron SBOX-5002

Brand: S&T Pages: 94

Brand: CHIEF Pages: 28

CRT Touch Monitor

Brand: 3M Pages: 30

Brand: VEEA Pages: 28

2USER-QIG-MINIQ-R1.1

Brand: JETWAY Pages: 11

Brand: Igel Pages: 2

IntelliStation E Pro Type 6216

Brand: IBM Pages: 87

Brand: Acer Pages: 72

PowerVault MD3600f Series

Brand: Dell Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands