Quick Sync indicator codes
Figure 9. Quick Sync indicator codes
1.
Quick Sync status indicator
2.
Quick Sync activation button
Table 10. Quick Sync indicator codes
Power indicator pattern
Condition
Slow flash
Indicates that Quick Sync is waiting to be configured
from iDRAC.
Solid
Indicates that Quick Sync is ready to transfer.
Flashes three times rapidly and then turns off
Indicates that the Quick Sync feature is disabled from
iDRAC.
Flashes continuously when the mobile device
touches the antenna
Indicates data transfer activity.
Flashes rapidly five times and turns off for one
second when the activation button is pressed.
This pattern is repeated until the activation
button is pressed again.
Indicates that the Quick Sync hardware is not
responding properly. Reseat the bezel. If the problem
persists, see Getting help section.
Off
Indicates that the Quick Sync feature is turned off.
Use the activation button to enable it. If pressing the
activation button does not turn on the LEDs, it
indicates that power is not delivered to the Quick
Sync bezel.
NOTE: For security purposes, Quick Sync turns
off after 30 seconds of inactivity after the
activation button is pressed. After timed-out, the
user is expected to press the activation button
again to activate Quick Sync.
Related Links
21
