Dell SD630-S Owner'S Manual Download Page 149

Page: 149 / 163

Troubleshooting iDRAC Direct (USB XML configuration)

For information about USB storage device and server configuration, see the Integrated Dell Remote
Access Controller User's Guide at

Dell.com/idracmanuals

Steps
1.

Ensure that your USB storage device is connected to the front USB Management Port, identified by

icon.

Ensure that your USB storage device is configured with an NTFS or an FAT32 file system with only
one partition.

Verify that the USB storage device is configured correctly. For more information about configuring

the USB storage device, see the Integrated Dell Remote Access Controller User's Guide at

Dell.com/

idracmanuals

In the

iDRAC Settings Utility

, ensure that

USB Management Port Mode

is configured as

Automatic

iDRAC Direct Only

Ensure that the

iDRAC Managed: USB XML Configuration

option is either

Enabled

Enabled only

when the server has default credential settings

Remove and reinsert the USB storage device.

If import operation does not work, try with a different USB storage device.

Next steps

If all troubleshooting fails, see the Getting help section.

Summary of Contents for SD630-S




































































































































































Search results

Summary of Contents for SD630-S

Reviews:

Related manuals for SD630-S

Brands by name

Popular brands

Dell SD630-S, Owner'S Manual

Search results

Summary of Contents for SD630-S

Reviews:

Related manuals for SD630-S

Brands by name

Popular brands