Dell SD630-S Owner'S Manual Download Page 10

Page: 10 / 163

Item

Indicator, Button, or

Connector

Icon

Description

NOTE: DVD devices are data only.

SD vFlash media card
slot

Enables you to insert a vFlash media card.

LCD menu buttons

Enables you to navigate the control panel LCD
menu.

Information tag

Contains system information such as service tag,
NIC, MAC address for your reference. The
information tag is a slide-out label panel.

LCD panel

Displays system ID, status information, and system
error messages. The LCD turns blue during normal
system operation. When the system needs
attention, the LCD turns amber and the LCD panel
displays an error code followed by descriptive text.

NOTE: If the system is connected to AC
power and an error is detected, the LCD turns
amber regardless of whether the system is
turned on or off.

Video connector

Enables you to connect a VGA display to the
system.

Hard drives (8)

Up to eight 2.5-inch hot swappable hard drives.

12.

Quick Sync

Indicates a Quick Sync enabled system. The Quick

Sync feature is optional and needs a Quick Sync

bezel. This feature allows management of the

system by using mobile devices. This feature

aggregates hardware or firmware inventory and

various system level diagnostic and error

information that can be used in troubleshooting

the system. For more information, see the

Integrated Dell Remote Access Controller User’s

Guide at

Dell.com/idracmanuals

Summary of Contents for SD630-S




































































































































































Search results

Summary of Contents for SD630-S

Reviews:

Related manuals for SD630-S

Brands by name

Popular brands

Dell SD630-S, Owner'S Manual

Search results

Summary of Contents for SD630-S

Reviews:

Related manuals for SD630-S

Brands by name

Popular brands