Dell SD630-S Owner'S Manual Download Page 137

Page: 137 / 163

Internal dual SD module

All expansion card risers

Heat sinks or heat sink blanks and processors or processor blanks

Memory modules and memory module blanks

Network daughter card

Cooling fan assembly

Cooling shroud

Power supply units

Reconnect all cables to the system board.

NOTE: Ensure that the cables inside the system are routed along the chassis wall and secured

by using the cable securing bracket.

Follow the procedure listed in the After working inside your system section.

Import your new or existing iDRAC Enterprise license. For more information, see the Integrated Dell

Remote Access Controller User's Guide at

Dell.com/idracmanuals

Ensure that you:
a.

Use the

Easy Restore

feature to restore the Service Tag. For more information, see the

Restoring the Service Tag by using the Easy Restore feature section.

If the Service Tag is not backed up in the backup flash device, enter the system service tag
manually. For more information, see the Entering the system service tag section.

Update the BIOS and iDRAC versions.

Re-enable the Trusted Platform Module (TPM). For more information, see the Re-enabling the

TPM for BitLocker users or Re-enabling the TPM for Intel TXT users section.

Summary of Contents for SD630-S




































































































































































Search results

Summary of Contents for SD630-S

Reviews:

Related manuals for SD630-S

Brands by name

Popular brands

Dell SD630-S, Owner'S Manual

Search results

Summary of Contents for SD630-S

Reviews:

Related manuals for SD630-S

Brands by name

Popular brands