Dell S5830DN User Manual Download Page 196

Page: 196 / 232

Action

Yes

Step 5

Add printer memory.

Resend the print job.

Are the documents printed?

The problem is
solved.

Contact

technical

support

Envelope seals when printing

Action

Yes

Use envelopes that have been stored in a dry environment.

Note:

Printing on envelopes with high moisture content can

seal the ﬂaps.

Resend the print job.

Does the envelope seal when printing?

Contact

technical

support

The problem is
solved.

Unable to read ﬂash drive

Action

Yes

Step 1

Check if the ﬂash drive is inserted into the front USB port.

Note:

The ﬂash drive does not work when it is inserted into the

rear USB port.

Does the problem remain?

Go to step 2.

The problem is
solved.

Step 2

Check if the ﬂash drive is supported. For more information, see

“Supported ﬂash drives and ﬁle types” on page 78

Does the problem remain?

Go to step 3.

The problem is
solved.

Step 3

Check if the front USB port is disabled.

Does the problem remain?

Contact

technical

support

The problem is
solved.

Troubleshooting

196

Summary of Contents for S5830DN









































































































































































































































Search results

Summary of Contents for S5830DN

Reviews:

Brands by name

Popular brands

Dell S5830DN, User Manual

Search results

Summary of Contents for S5830DN

Reviews:

Brands by name

Popular brands