Dell S5830DN User Manual Download Page 78

Page: 78 / 232

From the printer control panel, touch the document you want to print.

Touch the arrows to specify the number of copies for printing, and then touch

Print

Notes:

•

Do not remove the ﬂash drive from the USB port until the document has ﬁnished printing.

•

If you leave the ﬂash drive in the printer after leaving the initial USB menu screen, then touch

Held

Jobs

on the home screen to print ﬁles from the ﬂash drive.

Supported ﬂash drives and ﬁle types

Notes:

•

High

‑

speed USB ﬂash drives must support the full

‑

speed standard. Low-speed USB devices are not

supported.

•

USB ﬂash drives must support the File Allocation Table (FAT) system. Devices formatted with New
Technology File System (NTFS) or any other ﬁle system are not supported.

Recommended ﬂash drives

File type

Many ﬂash drives are tested and approved for use with the printer. For more information,
visit

www.dell.com/support/printers

Documents:

•

.pdf

•

.xps

Images:

•

.dcx

•

.gif

•

.jpeg or .jpg

•

.bmp

•

.pcx

•

.tiff or .tif

•

.png

•

.ﬂs

Printing

Summary of Contents for S5830DN









































































































































































































































Search results

Summary of Contents for S5830DN

Reviews:

Brands by name

Popular brands

Dell S5830DN, User Manual

Search results

Summary of Contents for S5830DN

Reviews:

Brands by name

Popular brands