manualshive.com logo in svg

Dell S5830DN, User Manual

Share
Download
Dell S5830DN User Manual Download Page 148

4

Insert the front side of the new staple case into the staple cartridge, and then push the rear side into the
cartridge.

5

Push the staple cartridge into the finisher until it 

clicks

 into place.

6

Close the stapler door.

Moving the printer

Before moving the printer

CAUTION—POTENTIAL INJURY: 

Before moving the printer, follow these guidelines to avoid personal

injury or printer damage:

•

Turn off the printer, and then unplug the power cord from the electrical outlet.

•

Disconnect all cords and cables from the printer.

•

If two or more optional finishers are installed, then remove the finishers individually from the printer.

Notes:

–

Make sure to remove the topmost finisher first.

–

To remove the finisher, hold the finisher on both sides, and then lift the latches to unlock the finisher.

Maintaining the printer

148

Summary of Contents for S5830DN









































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands