Dell S5830DN User Manual Download Page 112

Page: 112 / 232

Use

Eco-Mode

Off

Energy

Energy/Paper

Paper

Minimize the use of energy, paper, or specialty media.

Notes:

•

Off is the factory default setting. Off resets the printer to
its factory default settings.

•

Energy minimizes the power used by the printer.
Performance may be affected, but print quality is not.

•

Energy/Paper minimizes the use of power and of paper
and specialty media.

•

Paper minimizes the amount of paper and specialty
media needed for a print job. Performance may be
affected, but print quality is not.

Quiet Mode

Off

Reduce the amount of noise produced by the printer.

Notes:

•

Off is the factory default setting. This setting supports
the performance speciﬁcations for your printer.

•

On conﬁgures the printer to produce as little noise as
possible. This setting is best suited for printing text and
line art.

•

Selecting Photo from the printer driver may disable Quiet
mode and provide better print quality and full

‑

speed

printing.

Run Initial setup

Yes

Instruct the printer to run the setup wizard.

Notes:

•

Yes is the factory default setting.

•

After completing the setup wizard by selecting

Done

the Country select screen, the default becomes No.

Paper Sizes

Metric

Specify the unit of measurement for paper sizes.

Notes:

•

US is the factory default setting.

•

The initial setting is determined by your country or
region selection in the initial setup wizard.

Home screen customization

Change Language

Search Held Jobs

Held Jobs

USB Drive

Bookmarks

Jobs by user

Change the icons and buttons that appear on the printer
control panel.

For each icon or button, select from the following options:

Display

Do not display

Note:

“Do not display” is the factory default setting.

Understanding printer menus

112

Summary of Contents for S5830DN









































































































































































































































Search results

Summary of Contents for S5830DN

Reviews:

Brands by name

Popular brands

Dell S5830DN, User Manual

Search results

Summary of Contents for S5830DN

Reviews:

Brands by name

Popular brands