Dell S5830DN User Manual Download Page 176

Page: 176 / 232

Insert hole punch box

Insert the hole punch box into the ﬁnisher, and then touch

Continue

to clear the message.

Insert staple cartridge

Try one or more of the following:

•

Insert a staple cartridge.

•

Touch

Continue

to clear the message and print without using the staple ﬁnisher.

Insert Tray [x]

Insert the indicated tray into the printer.

Install bin [x]

Try one or more of the following:

•

Install the speciﬁed bin:

Turn off the printer.

Unplug the power cord from the electrical outlet.

Install the speciﬁed bin.

Connect the power cord to a properly grounded electrical outlet.

Turn the printer back on.

•

Cancel the print job.

•

Reset active bin

Install Tray [x]

Try one or more of the following:

•

Install the speciﬁed tray:

Turn off the printer.

Unplug the power cord from the electrical outlet.

Install the speciﬁed tray.

Connect the power cord to a properly grounded electrical outlet.

Turn the printer back on.

•

Cancel the print job.

•

Reset the active bin.

Insufficient memory for Flash Memory Defragment operation [37]

Try one or more of the following:

•

From the printer control panel, touch

Continue

to stop the defragmentation and continue printing.

•

Delete fonts, macros, and other data in the printer memory.

Troubleshooting

176

Summary of Contents for S5830DN









































































































































































































































Search results

Summary of Contents for S5830DN

Reviews:

Brands by name

Popular brands

Dell S5830DN, User Manual

Search results

Summary of Contents for S5830DN

Reviews:

Brands by name

Popular brands