34
Using Your Projector
Using the Control Panel
1
IR Receiver
Point the remote control towards the IR receiver
and press a button.
2
Left
/ Auto Adjust
Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to synchronize the projector to the input
source.
NOTE:
Auto Adjust does not operate if the
on-screen display (OSD) is displayed.
3
Up
/ Keystone
adjustment
Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to adjust image distortion caused by tilting
the projector (+40/-35 degrees).
4
Right
/ Source
Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to toggle through Analog RGB, Composite,
Component (YPbPr via VGA), HDMI, and
S-Video sources when multiple sources are
connected to the projector.
5
Menu
Press to activate the OSD. Use the directional
keys and the
Menu
button to navigate through
the OSD.
1
3
5
2
10
4
7
6
9
8
