Steps
1. Place the touchpad onto the palmrest, ensure the screw posts align with the ones on the palmrest. Install the four (M2x2) screws to
the top of touchpad.
2. Fold back the two adhesive tape strips onto the touchpad.
3. Connect the ribbon cable from the touchpad to the system board.
4. Install the three (M2x2) screws into the screw posts at the bottom of the palmrest
Next steps
1. Install the
.
2. Install the
.
3. Install the
4. Follow the procedure in
After working inside your computer
.
Disassembly and reassembly
45
Summary of Contents for Precision 3510
