Dell Precision 3510 Service Manual Download Page 73

Page: 73 / 78

6. Remove the

7. Remove the

8. Remove the

9. Remove the

10. Remove the

11. Remove the

12. Remove the

13. Remove the

14. Remove the

15. Remove the

NOTE:

The system board can be removed along with the heat sink.

About this task

The figure indicates the location of the Palmrest Assembly and provides a visual representation of the removal procedure.

Steps

Once the required parts are removed, the bare palmrest assembly can be accessed and removed.

Next steps

1. Install the

2. Install the

3. Install the

4. Install the

5. Install the

6. Install the

7. Install the

8. Install the

9. Install the

10. Install the

11. Install the

12. Install the

13. Install the

Disassembly and reassembly

Summary of Contents for Precision 3510















































































Search results

Summary of Contents for Precision 3510

Reviews:

Related manuals for Precision 3510

Brands by name

Popular brands

Dell Precision 3510, Service Manual

Search results

Summary of Contents for Precision 3510

Reviews:

Related manuals for Precision 3510

Brands by name

Popular brands