Installing the speakers
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the speakers and provides a visual representation of the installation procedure.
Steps
1. Place the speaker assembly onto the mounting points on the bottom base on the computer.
2. Route the cables from both the speaker modules through the routing points at the lower portion of the bottom base. Once secured,
connect the speaker's cable connector to the connector on the system board.
Next steps
1. Install the
.
2. Install the
.
3. Install the
4. Follow the procedure in
After working inside your computer
.
Disassembly and reassembly
47
Summary of Contents for Precision 3510
