Steps
1. Align and slide the solid-state drive into the slot.
2. Replace the single (M2x3) screw to secure the solid-state drive module to the system.
Next steps
1. Install the
2. Install the
.
3. Install the
4. Follow the procedure in
After working inside your computer
.
Removing the M.2 2230 solid-state drive
Prerequisites
1. Follow the procedure in
before working inside your computer
2. Remove the
3. Remove the
4. Disconnect the
About this task
The figure indicates the location of the M.2 2230 solid-state drive and provides a visual representation of the removal procedure.
Disassembly and reassembly
39
Summary of Contents for Precision 3510
