Dell Precision 3510 Service Manual Download Page 33

Page: 33 / 78

Installing the WWAN card

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The figure indicates the location of the WWAN card and provides a visual representation of the installation procedure.

Steps

1. Align the notch on the WWAN card with the tab on the WWAN-card slot and insert the WWAN card at an angle into the WWAN-card

slot.

2. Connect the WWAN antenna cables to the WWAN card.
3. Align and place the WWAN-card bracket to secure the WWAN card to the system board.
4. Replace the single (M2x3) screw to secure the WWAN card to the system board.

Next steps

1. Install the

battery cable

2. Install the

base cover

3. Install the

SD card

4. Follow the procedure in

After working inside your computer

Disassembly and reassembly

Summary of Contents for Precision 3510















































































Search results

Summary of Contents for Precision 3510

Reviews:

Related manuals for Precision 3510

Brands by name

Popular brands

Dell Precision 3510, Service Manual

Search results

Summary of Contents for Precision 3510

Reviews:

Related manuals for Precision 3510

Brands by name

Popular brands