Dell PowerVault NX200, Hardware Owner'S Manual, Page: 61 / 166

Using the System Setup Program and UEFI Boot Manager
59
PCI IRQ Assignment Screen
Serial Communication Screen
Option Description
<PCIe device> Use the <+> and <-> keys to manually select an IRQ
for a given device, or select Default to allow the BIOS to
select an IRQ value at system startup.
Option Description
Serial Communication
( On without Console
Redirection default)
Options are On without Console Redirection , On with
Console Redirection via COM1 , and Off .
Serial Port Address Specifies the address of the serial ports.
External Serial Connector
( Serial Device1 default)
Specifies whether Serial Device1 , Serial Device2 ,
or Remote Access Device has access to the external
serial connector.
Failsafe Baud Rate
(
115200
default)
Displays the failsafe baud rate used for console
redirection. This rate should not be adjusted.
Remote Terminal Type
( VT100/VT220 default)
Options are VT100/VT220 or ANSI .
Redirection After Boot
( Enabled default)
Enables or disables BIOS console redirection after the
operating system boots.
book.book Page 59 Monday, August 9, 2010 3:07 PM