manualshive.com logo in svg

Dell PowerVault MD3000i, Cli Manual

The Dell PowerVault MD3000i user manual is available for free download from manualshive.com. Stay up-to-date with the latest instructions and enhancements by accessing the update manual. Discover comprehensive information on using and optimizing your MD3000i storage system through our easily accessible manual.

Share
Download
background image

56

Configuring a Storage Array

•

Storage array host type

•

Global hot spares

 

NOTE: 

Before modifying your configuration, save a copy of your current 

configuration to a file (see "Saving a Configuration to a File" on page 47). If you have 
problems with your modifications, you can use the information in the file to restore 
your previous configuration.

Setting the Storage Array Password

The

 set storageArray 

command enables you to define a password for a storage 

array. The following syntax is the general form of the command:

set storageArray password="

password

"

The 

password

 parameter defines a password for the storage array. Passwords 

provide added security to a storage array to reduce the possibility of 
implementing destructive commands.

 

NOTE: 

CLI commands do not have interactive warnings for destructive commands. 

 

NOTICE: 

Implementing destructive commands can cause serious damage, 

including data loss.

Unless you define a password for the storage array, anyone can run all of the 
script commands. A password protects the storage array from any command 
that the RAID controller modules consider destructive. A destructive 
command is any command that can change the state of the storage array, such 
as virtual disk creation, reset, delete, rename, or change. If you have more 
than one storage array in a storage configuration, each array has a separate 
password. Passwords can have a maximum length of 30 characters. You must 
put quotation marks (" ") around the password. The following example shows 
how to use the

 set storageArray 

command to define a password:

client>smcli 123.45.67.89 -c "set storageArray 

password=\"1a2b3c4d5e"\;"

Setting Up SMTP and SNMP Alerts

The storage array can be set up to send automatic email alert messages to 
specified email addresses when specific events occur. View the current alert 
configuration settings using the following command:

SMcli -d -i -s -w -v -S

Summary of Contents for PowerVault MD3000i













































































































































































































































Reviews:

No comments

Related manuals for PowerVault MD3000i

RIHO GRID GB401 Installation Manual preview
GRID GB401
Brand: RIHO Pages: 9
Clare Controls ClareHome Installation Sheet preview
ClareHome
Brand: Clare Controls Pages: 2
Nexstar CX 3.5 User Manual preview
CX 3.5
Brand: Nexstar Pages: 15
PROIETTA AF32 Instruction Manual preview
AF32
Brand: PROIETTA Pages: 24
Aruba Networks PowerConnect W-AP124 Installation Manual preview
PowerConnect W-AP124
Brand: Aruba Networks Pages: 8
Dyconn Quartz 2 User Manual preview
Quartz 2
Brand: Dyconn Pages: 26
Encore ENNHD-1GS Specifications preview
ENNHD-1GS
Brand: Encore Pages: 1
Encore ENNHD-1000 Specifications preview
ENNHD-1000
Brand: Encore Pages: 1
Natec NKZ-0808 User Manual preview
NKZ-0808
Brand: Natec Pages: 20
Rosslare PS-C25TB Installation Manual preview
PS-C25TB
Brand: Rosslare Pages: 3
Rosslare ME-1015 Installation Manual preview
ME-1015
Brand: Rosslare Pages: 3
NAIM HDX-SSD - REFERENCE ISSUE 1 Reference Manual preview
HDX-SSD - REFERENCE ISSUE 1
Brand: NAIM Pages: 28
Leviton Opt-X 5WMNT-01C Instructions For Use Manual preview
Opt-X 5WMNT-01C
Brand: Leviton Pages: 30
Quer KOM0691 Owner'S Manual preview
KOM0691
Brand: Quer Pages: 12
LaCie Box Quick Install Manual preview
Box
Brand: LaCie Pages: 24
Vantec NexStar MX User Manual preview
NexStar MX
Brand: Vantec Pages: 23
Macurco WHK-1 Installation Instructions preview
WHK-1
Brand: Macurco Pages: 2
Salvo Studios S402 Quick Start Manual preview
S402
Brand: Salvo Studios Pages: 20

Brands by name

Popular brands

Load more brands