manualshive.com logo in svg

Dell PowerVault MD3000i, Cli Manual

The Dell PowerVault MD3000i user manual is available for free download from manualshive.com. Stay up-to-date with the latest instructions and enhancements by accessing the update manual. Discover comprehensive information on using and optimizing your MD3000i storage system through our easily accessible manual.

Share
Download
background image

160

Script Commands

 

NOTICE: 

Ensure that the multipath driver is running before you use this command, 

or the virtual disk will not be accessible.

 

NOTE: 

Under certain host operating system environments, you might be required to 

reconfigure the multipath host physical disk. You might also need to make operating 
system modifications to recognize the new I/O path to the virtual disks.

Revive Disk Group

This command forces the specified disk group and associated failed physical 
disks to the Optimal state. All physical disks assigned to the disk group must 
be installed before you attempt to run this command.

 

NOTICE: 

Correct use of this command depends on the data configuration on all of 

the physical disks in the disk group. Never attempt to revive a physical disk unless 
supervised by a Customer or Technical Support representative.

 

NOTICE: 

Do not attempt to run this command o a disk group that is in the Degraded 

state. Running this command on a disk group that is in the Degraded state can 
cause loss of access to the data on the physical disks in the disk group.

Syntax

revive diskGroup [

diskGroupNumber

]

Parameters

Revive Physical Disk

This command forces the specified physical disk to the Optimal state.

 

NOTICE: 

Correct use of this command depends on the data configuration on all 

physical disks in the disk group. Never attempt to revive a physical disk unless 
supervised by a Technical Support representative.

Syntax

revive physicalDisk [

enclosureID,slotID

]

Parameter

Description

diskGroup

Number of the disk group to be set to the Optimal state. You 
must put brackets ([ ]) around the disk group number.

Summary of Contents for PowerVault MD3000i













































































































































































































































Reviews:

No comments

Related manuals for PowerVault MD3000i

D-Link DSM-G600 - MediaLounge Wireless G Network Storage Enclosure NAS... Manual preview
DSM-G600 - MediaLounge Wireless G Network Storage Enclosure NAS...
Brand: D-Link Pages: 66
D-Link DSM-G600 - MediaLounge Wireless G Network Storage Enclosure NAS... Install Manual preview
DSM-G600 - MediaLounge Wireless G Network Storage Enclosure NAS...
Brand: D-Link Pages: 20
LEGRAND WHAD HE 3 101 66 Installation Manual preview
WHAD HE 3 101 66
Brand: LEGRAND Pages: 100
COUGAR CGR-5LMSB User Manual preview
CGR-5LMSB
Brand: COUGAR Pages: 16
iStarUSA T-5K25TU-SA User Manual preview
T-5K25TU-SA
Brand: iStarUSA Pages: 2
SilverStone Precision PS02B User Manual preview
Precision PS02B
Brand: SilverStone Pages: 10
IBM 7383 Installation And Service Manual preview
7383
Brand: IBM Pages: 488
MVP D3 SERIES Product Instructions preview
D3 SERIES
Brand: MVP Pages: 19
ZALMAN HD160XT Plus Manual preview
HD160XT Plus
Brand: ZALMAN Pages: 14
StarTech.com SM2E1BMU31C Quick Start Manual preview
SM2E1BMU31C
Brand: StarTech.com Pages: 2
Center D02161 Installation Instructions Manual preview
D02161
Brand: Center Pages: 11
Sonnet fusion d500p User Manual preview
fusion d500p
Brand: Sonnet Pages: 6
Sonnet Fusion QR User Manual preview
Fusion QR
Brand: Sonnet Pages: 14
Belkin RK1000 User Manual preview
RK1000
Brand: Belkin Pages: 24
Sven 3E-210SS User Manual preview
3E-210SS
Brand: Sven Pages: 6
j5 create JEE351 Manual preview
JEE351
Brand: j5 create Pages: 2
CRU NVMe WriteBlocker User Manual preview
NVMe WriteBlocker
Brand: CRU Pages: 12
CRU Dataport DataPort 350 Installation Manual preview
DataPort 350
Brand: CRU Dataport Pages: 2

Brands by name

Popular brands

Load more brands