manualshive.com logo in svg

Dell PowerVault DL4000, User Manual

Share
Download
Dell PowerVault DL4000 User Manual Download Page 91

Text Box

Description

CAUTION: Do not change this option from the default setting.

Maximum Transfer 
Queue Depth

Specifies the number of commands that can be sent concurrently. You can 
adjust this option to a higher number if your system as a high number of 
concurrent input/output operations.

Outstanding 
Reads per Stream

Specifies how many queued read operations will be stored on the back end. 
This setting helps to control the queuing of agents.

NOTE: Dell recommends setting this value to 24.

Excluded Writers

Select a writer if you want to exclude it. Since the writers that appear in the list 
are specific to the machine that you are configuring, you may not see all the 
writers listed. Some writers you may see include:
• ASR Writer
• BITS Writer
• COM+ REGDB Writer
• Performance Counters Writer
• Registry Writer
• Shadow Copy Optimization Writer
• SQLServerWriter
• System Writer
• Task Scheduler Writer
• VSS Metadata Store Writer
• WMI Writer

Transfer Data 
Server Port

Sets the port for transfers. The default setting is 8009.

Transfer Timeout

Specifies in minutes and seconds the amount of time to allow a packet to be 
static without transfer.

Snapshot Timeout

Specifies in minutes and seconds the maximum time to wait to take a 
snapshot.

Network Read 
Timeout

Specifies in minutes and seconds the maximum time to wait for a read 
connection. If the network read is not performed in that time, the operation is 
repeated.

Network Write 
Timeout 

Specifies the maximum time in seconds to wait for a write connection. If the 
network write is not performed in that time, the operation is repeated.

6.

Click 

OK

.

Restarting a service 

To restart a service:

1.

In the Core Console, click the 

Machines

 tab.

2.

From the 

Machines

 tab, perform one of the following:

91

Summary of Contents for PowerVault DL4000
















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands