manualshive.com logo in svg

Dell PowerVault DL4000, User Manual

Share
Download
Dell PowerVault DL4000 User Manual Download Page 126

VM Management for Hyper-V and ESXi virtual standby(s)

Field

Description

Agent / VM 

Information

Agent Name

: Indicates the name of the protected machine for which you have 

created virtual standby.

VM Name

: Indicates the name of the VM.

NOTE: It is recommended to use a name that is derived from the agent name 
or one that matches the agent name. You can also create a name derived 
from the hypervisor type, IP address or DNS name.

Status

: Indicates the status of the virtual machine. Possible values are-

• Running
• Stopped
• Starting
• Suspended
• Stopping
• Unknown (temporary status)

NOTE: The above status values depend on the hypervisor type. Not all 
hypervisors display all the status values.

Location

: Indicates the location of VM. For example, D:\export. The VM location 

must have sufficient space to hold the VM metadata and virtual drives needed for 
the virtual machine.

Export Status

Status

1.

Indicates the following status of an export process:

• Complete
• Failed
• In progress

126

Summary of Contents for PowerVault DL4000
















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands