Dell PowerVault 50F, Installation And Troubleshooting Manual

Page: 69 / 172

support.dell.com PowerVault 56F 16-Port Fibre Channel Switch Commands 4-13
Table 4-8 describes the system services.
( 1 !,
%
rusersd Dynamically enables or disables a server that
returns information by way of remote procedure
calls (RPC) about the user logged into the system.
The information returned includes: the user login
name, the system name, the login protocol or type,
login time, idle time, and remote login location (if
applicable).
The retrieval of this information is supported by a
number of operating systems which support RPC.
On most UNIX-based systems (HP-UX, Irix, Linux,
Solaris, and so on), the command to retrieve the
information is
rusers
. Please see your local system
documentation for the appropriate usage of the
rusers
or equivalent command.
Off
rstatd Dynamically enables or disables a server that
returns information by way of RPC about system
operation information. The protocol provides for a
wide range of system statistics; however, only the
Ethernet interface statistics and system up time
are supported.
The retrieval of this information is supported by a
number of operating systems which support RPC.
On most UNIX-based systems (HP-UX, Irix, Linux,
Solaris, and so on) the commands to retrieve the
information are
rup
and
rsysinfo
. Please see your
local system documentation for the appropriate
usage of the
rup , rsysinfo , or equivalent
commands.
Off