NOTE:
Ensure that the processor and the bracket are placed in the tray before you install the heat sink.
3. If you are using an existing heat sink, remove the thermal grease from the heat sink by using a clean lint-free cloth.
4. Use the thermal grease syringe included with your processor kit to apply the grease in a quadrilateral design on the top of
the processor.
CAUTION:
Applying too much thermal grease can result in excess grease coming in contact with and
contaminating the processor socket.
NOTE:
The thermal grease syringe is intended for single use only. Dispose the syringe after you use it.
5. Place the heat sink on the processor and push down until the bracket locks onto the heat sink.
NOTE:
●
Ensure that the two guide pin holes on the bracket match the guide holes on the heat sink.
●
Ensure that the pin 1 indicator on the heat sink is aligned with the pin 1 indicator on the bracket before placing the
heat sink onto the processor and bracket.
Replace a CPU
99
