Non-redundant AC power supply unit
Your system supports a non-redundant 350 W AC power supply unit (PSU).
NOTE: When selecting or upgrading your system configuration, verify the system power
consumption with the Dell Energy Smart Solution Advisor at
Dell.com/ESSA
to ensure optimum
power utilization.
Removing a non-redundant AC power supply unit
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1.
Ensure that you follow the
Safety instructions
.
2.
Follow the procedure listed in
Before working inside your system
.
Steps
1.
Disconnect all the power cables from the power supply unit (PSU) to the system board, hard drive
backplane, hard drives, and optical drives.
2.
Remove the screw securing the PSU to the chassis and slide the PSU out of the PSU cage.
114
