Dell PowerEdge systems 6300, User Manual

Page: 46 / 143

3-14 Dell PowerEdge 6300 Systems User’s Guide
In addition, the scsi subdirectory on your NetWare 4.11 drivers diskette contains the
following files:
‡
aic78u2.ddi — A driver definition information file for the 78 xx Ultra2 SCSI series
host adapters that provides setup information to NetWare during installation;
NetWare can then prompt you with parameters to be configured for the device
driver during the installation process.
‡
aha2940.ddi — A driver definition information file for the AHA-2940U2W host
adapter.
‡
aspicd.ddi — A device driver definition file.
‡
aspitran.ddi — A device driver definition file.
To begin driver installation, first load the EZ-SCSI utility as described in the following
subsection, “Installing EZ-SCSI.” Then if you are performing a first-time NetWare
installation, see “Installing NetWare and the Driver” found later in this section. If
NetWare is already installed in your system, see “Using NetWare to Install or Update
the Driver” found later in this section.
NOTE: Your system must have a bootable version of MS-DOS installed before you can
complete the Novell NetWare installation.
,QVWDOOLQJ(=6&6,
The Adaptec EZ-SCSI utility automatically configures the computer to use an Adaptec
SCSI host adapter and the devices connected to it. The Adaptec EZ-SCSI utility also
copies applications and device drivers to the computer’s hard-disk drive. The configu-
ration and installation process is explained with a series of screens. In most cases,
the system and SCSI devices are configured to take full advantage of all the perfor-
mance benefits of SCSI when you accept the default values suggested by these
screens.
Follow these steps to install the Adaptec EZ-SCSI utility:
,I\RXKDYHQRWDOUHDG\GRQHVRFUHDWHDQ$GDSWHF(=6&6,GLVNHWWHIRU
WKHYHUVLRQRI1HW:DUH\RXDUHXVLQJ
Chapter 2, “Using the Dell Server Assistant CD,” provides instructions for creat-
ing this diskette.
,QVHUW\RXU$GDSWHF(=6&6,GLVNHWWHLQWRWKHGLVNHWWHGULYH
7\SH
dosinst
DQGSUHVV(QWHU!
A message appears while the EZ-SCSI utility loads into memory.
:KHQWKHILUVW(=6&6,VFUHHQDSSHDUVUHDGWKHWH[WFDUHIXOO\
You can press <F1> on any screen for additional help. Press <Esc> to exit a Help
screen.
3UHVV(QWHU!WRFRQWLQXHZLWKWKHLQVWDOODWLRQ