Dell PowerEdge systems 6300, User Manual

Page: 42 / 143

3-10 Dell PowerEdge 6300 Systems User’s Guide
8VLQJ:LQGRZV17WR,QVWDOOWKH'ULYHU
To install the SCSI drivers, use the following procedure:
&UHDWHWKH:LQGRZV17GULYHUGLVNHWWHIURPWKH 'HOO6HUYHU$VVLV
WDQW &'
5HVWDUW:LQGRZV176HWXS
Windows NT copies files to your system and automatically reboots your system.
At the first blue screen after reboot, Windows NT Setup will display the following
message:
Setup is inspecting your computer’s hardware
configuration...
3UHVV)!
The following message appears:
Setup could not determine the type of one or more mass stor-
age devices installed in your system, or you have chosen to
manually specify an adapter.
7\SH
s
A list of supported SCSI host adapters appears.
&OLFN2WKHU
,QVHUWWKH:LQGRZV17GULYHUGLVNHWWH\RXFUHDWHGLQWRWKHGLVNHWWH
GULYH
&OLFNWKH6WDUWEXWWRQWKHQFOLFN5XQDQGW\SH
a:\
LQWKH2SHQGLDORJ
ER[
7\SH
s
6HOHFWWKHKRVWDGDSWHUIURPWKHOLVW
For the Adaptec AIC-7890 SCSI controller, select Adaptec AHA-294 xU2/295xU2/
AIC-789 x PCI Ultra2 SCSI controller (Windows NT 4.0).
For the Adaptec-7860 SCSI controller, select Adaptec AHA-290 x/291x/294x/394x/
494 x/AIC-78xx PCI SCSI Controller (Windows NT 4.0).
3UHVV(QWHU!
The driver is copied from the diskette to your system.
5HSHDWVWHSVIRUHDFK6&6,KRVWDGDSWHULQVWDOOHGRQWKHV\VWHP
&OLFN<HVZKHQSURPSWHGWRUHVWDUWWKHV\VWHPDQGUHPRYHWKHGLVNHWWH
IURPWKHGLVNHWWHGULYH
After the system reboots, the new drivers are active. Some drive letter assignments
may have changed from the previous configuration.