Dell PowerEdge R220 Owner'S Manual Download Page 16

Page: 16 / 93

Processor Settings Screen

Menu Item

Description

Logical Processor

Allows you to enable or disable logical processors and display the number of
logical processors. If the

Logical Processor

option is set to

Enabled

, the BIOS

displays all the logical processors. If this option is set to

Disabled

, the BIOS only

displays one logical processor per core. By default, the

Logical Processor

option is

set to

Enabled

Virtualization
Technology

Allows you to enable or disable the additional hardware capabilities provided for
virtualization. By default, the

Virtualization Technology

option is set to

Enabled

Adjacent Cache
Line Prefetch

Allows you to optimize the system for applications that require high utilization of
sequential memory access. By default, the

Adjacent Cache Line Prefetch

option is

set to

Enabled

. You can disable this option for applications that require high

utilization of random memory access.

Hardware
Prefetcher

Allows you to enable or disable hardware prefetcher. By default, the

Hardware

Prefetcher

option is set to

Enabled

DCU Streamer
Prefetcher

Allows you to enable or disable Data Cache Unit streamer prefetcher. By default,
the

DCU Streamer Prefetcher

option is set to

Enabled

DCU IP Prefetcher Allows you to enable or disable Data Cache Unit IP prefetcher. By default, the

DCU

IP Prefetcher

option is set to

Enabled

Execute Disable

Allows you enable or disable execute disable memory protection technology. By
default, the

Execute Disable

option is set to

Enabled

Number of Cores
per Processor

Allows you to control the number of enabled cores in each processor. By default,
the

Number of Cores per Processor

option is set to

All

Processor 64-bit
Support

Specifies if the processor(s) support 64-bit extensions.

Processor Core
Speed

Displays the maximum core frequency of the processor.

Family-Model-
Stepping

Displays the family, model and stepping of the processor as defined by Intel.

Brand

Displays the brand name reported by the processor.

Level 2 Cache

Displays the total L2 cache.

Level 3 Cache

Displays the total L3 cache.

Number of Cores

Displays the number of cores per processor.

SATA Settings Screen

Menu Item

Description

Embedded SATA

Allows the embedded SATA to be set to Off, ATA, AHCI, or RAID mode. By default,
Embedded SATA is set to

AHCI Mode

Summary of Contents for PowerEdge R220






























































































Search results

Summary of Contents for PowerEdge R220

Reviews:

Related manuals for PowerEdge R220

Brands by name

Popular brands

Dell PowerEdge R220, Owner'S Manual

Search results

Summary of Contents for PowerEdge R220

Reviews:

Related manuals for PowerEdge R220

Brands by name

Popular brands