NOTE: Ensure that pin 1 indicator on the CPU tray is aligned with the pin 1 indicator on the processor.
2.
Flex the outer edges of the bracket around the processor, close to the fabric connector, ensuring that the processor is locked
into the clips on the bracket.
3.
Press the other end of the bracket to ensure that the clip is locked on to the processor.
NOTE: Ensure that pin 1 indicator on the bracket is aligned with the pin 1 indicator on the processor before placing
the bracket on the processor.
Figure 43. Installing the processor bracket
4.
If you are using an existing heat sink, remove the thermal grease from the heat sink by using a clean lint-free cloth.
5.
Use the thermal grease syringe included with your processor kit to apply the grease in a spiral quadrilateral design on the top of
the processor.
CAUTION: Applying too much thermal grease can result in excess grease coming in contact with and contaminating
the processor socket.
NOTE: The thermal grease syringe is intended for single use only. Dispose of the syringe after you use it.
92
Summary of Contents for PowerEdge C6320p
