Item
Indicator, Button, or
Connector
Icon
Description
•
To turn the system ID on or
off.
NOTE: If the sled stops
responding during POST,
press and hold the
system ID button (for
more than five seconds)
to enter the BIOS
progress mode.
9
System identification indicator
or button for sled 2
Press the system ID button:
•
To locate a particular sled
within the enclosure.
•
To turn the system ID on or
off.
NOTE: If the sled stops
responding during POST,
press and hold the
system ID button (for
more than five seconds)
to enter the BIOS
progress mode.
10
Power-on indicator or system
state indicator or power button
for sled 2
Press the power button to turn
the sled on or off. The indicator
on the button indicates if the
sled is on or off.
The power-on indicator turns
Amber when a critical system
event occurs.
NOTE:
To gracefully shut down an
ACPI-compliant operating
system, press the power
button.
14
Summary of Contents for PowerEdge C6320p
