Dell PowerEdge C6320p, Owner'S Manual

Page: 100 / 194

Location Card type Form factor Link width Slot width
Mellanox ConnectX-4
Dual Port 100 GbE
QSFP Adapter
Low Profile x8 x16
Mellanox ConnectX-4
Single Port VPI EDR
QSFP+ Adapter
Low Profile x8 x16
Mellanox ConnectX-4
Dual Port VPI EDR
QSFP+ Adapter
Low Profile x8 x16
QSFP carrier card (with
fabric processor only)
Low Profile N/A N/A
Mezzanine slot
LSI 2008 8-Port Adapter Mezzanine card x8 x4
Intel Gigabit Dual Port
I350-t Adapter
Mezzanine card x8 x4
Intel 82599 Dual Port
10G Adapter
Mezzanine card x8 x4
Removing the expansion card riser assembly
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety
instructions that are shipped with your product.
NOTE: You must install an expansion card filler bracket over an empty expansion slot to maintain Federal
Communications Commission (FCC) certification of the system. The brackets also keep dust and dirt out of the system
and aid in proper cooling and airflow inside the system.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Remove the sled from the enclosure.
4. Keep the Phillips #2 screwdriver ready.
Steps
1.
Remove the screws that secure the expansion card riser assembly.
2. Lift the expansion card riser assembly out of the sled.
100