1-6
S y s t e m C o n f i g u r a t i o n G u i d e
www
.dell.com | support.dell.com
2
Click the
Start
button, point to
Programs
→
Accessories
→
Communications
, and
then click
HyperTerminal
.
3
Enter a name for the new connection, select an icon, and then click
OK
.
4
From the
Connect to
drop-down menu, select an available COM port, and then click
OK
.
After you select an available COM port, the COM port properties window appears.
5
Configure the port with the following settings:
•
Set
Bits per second
to
115200
.
•
Set
Data bits
to
8
.
•
Set
Parity
to
None
.
•
Set
Stop bits
to
1
.
•
Set
Flow control
to
Hardware
.
6
Click
OK
.
7
In HyperTerminal, click
File
, click
Properties
, and then click the
Settings
tab.
8
Ensure that the
Function, arrow, and Ctrl keys act as
field is set to
Terminal Keys
.
9
Ensure that the
Backspace key sends
field is set to
Ctrl+H
.
10
Change the
Emulation
setting from
Auto detect
to
ANSI
or
VT 100/220
.
Ensure that this setting is the same as the setting you selected for the
Console
Redirection
option on the server module.
11
Click
Terminal Setup
.
A setting for the number of rows and columns appears.
12
Change the number of rows from
24
to
26
and leave the number of columns at
80
.
If you do not have these settings, you must upgrade your terminal emulation software.
13
Click
OK
twice.
14
Press <Enter> to get the serial console logon:
Username = root
Password = calvin
You are logged in to the remote access features on the system management module.
0w440eb1.fm Page 6 Monday, October 28, 2002 2:23 PM
