Dell PowerConnect J-SRX240, Hardware Manual

Page: 67 / 160

CHAPTER 10
Installing the J-SRX240 Services Gateway
This chapter includes the following topics:
•
J-SRX240 Services Gateway Safety Requirements, Warnings, and Guidelines on page 51
• Preparing the J-SRX240 Services Gateway for Installation on page 51
• Installing the J-SRX240 Services Gateway on page 52
•
Replacing or Installing Mini-Physical Interface Modules in the J-SRX240 Services
Gateway on page 54
J-SRX240 Services Gateway Safety Requirements, Warnings, and Guidelines
To avoid harm to yourself or the device as you install and maintain it, follow the guidelines
for working with and near electrical equipment, as well as the safety procedures for
working with devices. For a discussion of how to make the installation site a safe
environment and a list of safety warnings, see the Appendix A for “Safety and Regulatory
Compliance Information” on page 99.
NOTE: Providing an exhaustive set of guidelines for working with electrical equipment
is beyond the scope of this guide.
Related Topics Preparing the J-SRX240 Services Gateway for Installation on page 51
•
•
Installing the J-SRX240 Services Gateway on page 52
Preparing the J-SRX240 Services Gateway for Installation
You can mount a J-SRX240 Services Gateway in a rack. The services gateway can be
mounted on four-post (telco) racks, enclosed cabinets, and open-frame racks.
NOTE: The J-SRX240 Services Gateway does not support center-mount racks.
51