Dell PowerConnect J-SRX240, Hardware Manual

Page: 73 / 160

Arrange network cables as follows to prevent them from dislodging or developing stress
points:
•
Secure cables so that they are not supporting their own weight as they hang to the
floor.
• Place excess cable out of the way in neatly coiled loops.
•
Use fasteners to maintain the shape of cable loops.
Related Topics Installing the J-SRX240 Services Gateway on page 52
•
•
Grounding the J-SRX240 Services Gateway on page 57
•
Connecting the J-SRX240 Services Gateway to the Power Supply on page 55
•
Powering On and Powering Off the J-SRX240 Services Gateway on page 59
Grounding the J-SRX240 Services Gateway
To meet safety and electromagnetic interference (EMI) requirements and to ensure
proper operation, you must adequately ground the J-SRX240 Services Gateway before
connecting power.
Figure 12 on page 57 shows the J-SRX240 Services Gateway grounding point.
Figure 12: Grounding the J-SRX240 Services Gateway
You ground the device by connecting a grounding cable to earth ground and then attaching
it to the chassis grounding point using one 6–32 UNC screw.
CAUTION: Before you install the device, a licensed electrician must attach a cable lug
to the grounding and power cables that you supply. A cable with an incorrectly attached
lug can damage the device (for example, by causing a short circuit).
57
Chapter 11: Connecting, Grounding, and Powering On the J-SRX240 Services Gateway