manualshive.com logo in svg

Dell PowerConnect 3248, System User'S Manual

Share
Download
Dell PowerConnect 3248 System User'S Manual Download Page 4

l

Blinking orange 

—

 A 10/100-Mbps link is up and there is activity. 

 

l

Flashing orange 

—

 The link is in the admin down state. 

 

l

Off 

—

 The link is down. 

 

Duplex (FDX) Mode 

l

Green 

—

 A full-duplex link is up. 

 

l

Off 

—

 A half-duplex link is up. 

 

Back-Panel Descriptions 

The back panel of the switch contains the AC power receptacle and the RPS connector. 

  

AC Power Receptacle  

The switch automatically adjusts its power setting to any supply voltage in the range of 100 to 240 V alternating current (VAC). 

RPS Connector  

Connect the optional RPS to the RPS connector. If the switch's internal power unit fails, the redundant power system automatically supplies power to the 
switch for uninterrupted operation. 

The switch supports the Dell PowerConnect RPS-600 external redundant power system. 

Management 

The following sections describe options for managing the switch. 

Web-Based Interface  

After you have successfully installed the switch, you can configure the switch, monitor the LED panel, and display statistics graphically using a web browser, 
such as Netscape Navigator (version 6.2 and higher) or Microsoft

® 

Internet Explorer (version 5.0).  

Command-Line-Driven Console Interface Through a Serial Port or Telnet  

You can also connect a computer or terminal to the serial console port or use Telnet to access the switch. The command-line-driven interface provides complete 
access to all switch management features. Most of the common commands are described in "

Management Interface

." For a full list of commands, see the

 

Command Line Reference

, which is included on the documentation CD. 

SNMP-Based Management  

You can manage the switch with an SNMP-compatible console program. The switch is compatible with SNMP version 1.0.  

The SNMP agent decodes the incoming SNMP messages and responds to requests with MIB objects stored in the database. The SNMP agent updates the MIB 
objects every 5 seconds to generate statistics and counters. 

The switch supports a comprehensive set of MIB extensions: 

l

RFC 1213 MIB II 
 

l

RFC 2863 Interfaces Evolution MIB 
 

l

RFC 2665 Ethernet MIB 
 

l

RFC 1493 Bridge MIB 
 

l

RFC 2674 Extended Bridge MIB 
 

l

RFC 2819 RMON MIB 
 

l

RFC 2737 Entity MIB 
 

NOTE: 

The Gigabit Ethernet ports support full- and half-

duplex operation at 10/100 Mbps but only support full

-duplex operation at 1000 Mbps. 

NOTE: 

See the RPS-600 documentation for more information. 

 

CAUTION: 

Do not use the switch with any redundant power system other than the Dell PowerConnect RPS-600.

NOTE: 

To access the switch through a web browser, the computer running the web browser must have IP-based network access to the switch. 

Summary of Contents for PowerConnect 3248











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands