manualshive.com logo in svg

Dell PowerConnect 3248, System User'S Manual

Share
Download
Dell PowerConnect 3248 System User'S Manual Download Page 30

Example  

Console(config)#interface ethernet 1/5  

Console(config-if)#bridge-group 1 path-cost 50  

Console(config-if)#bridge-group 1 priority 0  

Console(config-if)#bridge-group 1 portfast  

Trunk Settings  

On the 

Trunk Settings

 page, you can specify Spanning Tree parameters for each trunk. For each port number listed in the 

Trunk

 column, the following fields 

are available: 

l

Priority

 

—

 Indicates the priority assigned to the trunk for the Spanning Tree Protocol (0 to 255). A trunk with a higher priority is less likely to be blocked 

if the Spanning Tree Protocol detects network loops. Low numeric value indicates a high priority. 
 

l

Path Cost

 

—

 Specifies the cost assigned to the trunk for the Spanning Tree Protocol (1 to 65535). A trunk with a lower cost is less likely to be blocked if 

the Spanning Tree Protocol detects network loops. 
 

l

Fast Link 

—

 Immediately enables the trunk in forwarding state when a link comes up. The trunk is not part of the Spanning Tree at that time, but will 

participate in future Spanning Tree resolutions.  
 

  

CLI Commands 

The following table summarizes the equivalent CLI commands for items in the 

Spanning Tree/Trunk Settings

 page. 

Example  

Console(config)#interface port-channel 1  

Console(config-if)#bridge-group 1 path-cost 50  

Console(config-if)#bridge-group 1 priority 0  

Console(config-if)#bridge-group 1 portfast  

VLAN 

You can use virtual LANs (VLANs) to assign ports on the switch to any of up to 255 LAN groups. In conventional networks with routers, broadcast and multicast 
traffic is split up into separate domains. Switches do not inherently support broadcast domains, which can lead to broadcast storms in large networks. By 
using IEEE 802.1Q-compliant VLANs and GARP VLAN Registration Protocol (GVRP), you can organize any group of network nodes into separate broadcast 
domains, confining broadcast and multicast traffic to the originating group. This also provides a more secure and cleaner network environment. For more 
information on how to use VLANs, see "

VLANs

." 

The 

VLAN

 page includes links to the following pages: 

bridge-group 

bridge-group

 path-cost 

cost

 

Configures the spanning tree path cost for the specified port 

bridge-group 

bridge-group

 priority 

priority

 

Configures the priority for the specified port 

bridge-group 

bridge-group

 portfast 

Sets a port to fast forwarding state 

NOTE: 

Use Fast Link if a device is connected to a trunk that requires network access immediately when the link comes up and cannot wait for a 

Spanning Tree resolution. 

Command 

Usage 

bridge-group 

bridge-group

 path-cost 

cost

 

Configures the spanning tree path cost for the specified trunk 

bridge-group 

bridge-group

 priority 

priority

 

Configures the priority for the specified trunk 

bridge-group 

bridge-group

 portfast 

Sets a trunk to fast forwarding state 

Summary of Contents for PowerConnect 3248











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands