Copying the Running Configuration to a File
1.
In the
Copy Running Config to File
field, specify a filename for the configuration file (with no more than 32 characters). If the filename already exists, it
replaces the file. The filename cannot be the same as the factory default configuration file,
Factory_Default_Config.cfg
.
2.
Click
Copy to File
.
CLI Commands
The following table summarizes the equivalent CLI commands for items in the
Switch/Configuration
page.
Example
Console#copy tftp startup-config
TFTP server ip address: 10.1.0.99
Source configuration file name: startup.01
Startup configuration file name [startup]:
/
Console#
Reset
Click
Reset
to reboot the switch. When prompted, confirm that you want to reset the switch.
CLI Commands
The following table summarizes the equivalent CLI command for items in the
Switch/Reset
page.
Example
Command
Usage
copy file {file | running-config | startup-
config | tftp}
Uploads a configuration file from the switch's flash memory to a
TFTP server
copy tftp {file | running-config | startup-
config}
Downloads a configuration file to the switch's flash memory from
a TFTP server
boot system {boot-rom| config | opcode}:
filename
Specifies the file or image used to start up the system
Command
Usage
reload
Restarts the system
