Dell PERC S130, User Manual

Page: 33 / 47

NOTE: A global hot spare disk cannot be created if you have Linux RAID configured on the system.
Unassign a global hot spare
1. Enter the Dell PERC S130 Configuration Utility . See Entering the DELL PERC S130 Configuration Utility .
2. Click Physical Disk Management → Select Physical Disk Operations .
3. Select a global hot spare disk from the drop-down menu.
4. Click the link Unassign Hot Spare .
Assigning the dedicated hot spare
1. Enter the Dell PERC S130 Configuration Utility . See Entering the DELL PERC S130 Configuration Utility .
2. Click Virtual Disk Management
→
Manage Virtual Disk Properties
→
Manage Dedicated Hot Spares .
NOTE: Assign dedicated hot spare only from disk drives populated across slots 0-3 of the system. For information
about the disk connectivity for AHCI devices, see
Disk connectivity for AHCI devices ,and for disks slot information,
see the system specific Owner's Manual at dell.com/poweredgemanuals.
3. Select the physical disk that is in the ready state from the drop-down menu.
4. Click the link Add Hot Spare Disk .
33