Dell P93F Service Manual Download Page 49 | Manualshive

Page: 49 / 102

background image

Steps

1. Remove the (M2.5x2.5) screw that secures the power button assembly with fingerprint reader cable bracket to the power button

board.

2. Remove the power button assembly with fingerprint reader cable bracket from the power button board.
3. Disconnect the power button assembly with fingerprint reader cable from the power button board.
4. Disconnect the power button board cable from the connector on the system board.
5. Peel the power button board cable from the palmrest.
6. Remove the (M2x3) screw that secures the power button board to the computer.
7. Remove the power button board with the power button board cable from the computer.
8. Disconnect the power button board cable from the power button board.

Installing the power button assembly with fingerprint
reader

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The figure indicates the location of the power button assembly with fingerprint reader and provides a visual representation of the
installation procedure.

Steps

1. Connect the power button board cable to the power button board.
2. Align and place the power button board with power button cable into its slot on the computer.
3. Replace the (M2x3) screw to secure the power button board.
4. Adhere the power button board cable to the palmrest.
5. Connect the power button board cable to the connector on the system board.
6. Connect the power button assembly with fingerprint reader cable to the power button board,
7. Replace the power button assembly with fingerprint reader cable bracket above the power button daughter board.
8. Replace the (M2.5x2.5) screw to secure the power button assembly with fingerprint reader cable bracket in place.

Next steps

heat-sink assembly

.

.

5. Follow the procedure in

after working inside your computer

.

Inderramme

Removing the inner frame

Prerequisites

1. Follow the procedure in

before working inside your computer

.

.

primary M.2 SSD

.

Adskillelse og samling

49

«
...
47
48
49
50
51
...
»

Summary of Contents for P93F







































































































Reviews:

No comments

Related manuals for P93F

Brand: IBM Pages: 4

Brand: IBM Pages: 189

Brand: IBM Pages: 4

Brand: IBM Pages: 6

Brand: IBM Pages: 5

Brand: IBM Pages: 6

Brand: IBM Pages: 3

Brand: IBM Pages: 116

Brand: IBM Pages: 10

Brand: IBM Pages: 2

Brand: IBM Pages: 134

Brand: IBM Pages: 88

Brand: IBM Pages: 229

Brand: IBM Pages: 124

Brand: IBM Pages: 2

THINKPAD R50 series

Brand: IBM Pages: 108

ThinkPad i Series 1400

Brand: IBM Pages: 46

Brand: IBM Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands