Steps
1. Align and place the power-adapter cable on the computer.
2. Place the power-adapter port into its slot on the plamrest.
3. Replace the power-adapter cable bracket on the power-adapter port.
4. Replace the (M2x3) screw to secure the power-adapter cable bracket to the computer.
5. Connect the power-adapter cable to the connector on the system board.
Next steps
1. Install the
2. Install the
.
3. Install the
.
4. Install the
5. Follow the procedure in
after working inside your computer
.
Kort til tænd/sluk-knap
Removing the power button board
Prerequisites
1. Follow the procedure in
before working inside your computer
2. Remove the
.
3. Remove the
4. Remove the
.
5. Remove the
.
About this task
The figure indicates the location of the power button board and provides a visual representation of the removal procedure.
46
Adskillelse og samling
Summary of Contents for P93F
