Steps
1. Place the power button into its slot on the computer.
2. Replace the two (M2x3) screws to secure the power button in place.
Next steps
1. Install the
.
2. Install the
3. Install the
.
4. Install the
.
5. Install the
6. Follow the procedure in
after working inside your computer
.
Tænd/sluk-knapmodul med fingeraftrykslæser
Removing the power button assembly with fingerprint
reader
Prerequisites
1. Follow the procedure in
before working inside your computer
2. Remove the
.
3. Remove the
4. Remove the
.
5. Remove the
.
6. Remove the
power button board assembly with fingerprint reader
.
About this task
The figure indicates the location of the power button and provides a visual representation of the removal procedure.
58
Adskillelse og samling
Summary of Contents for P93F
