background image

Steps

1. Align and place the smart-card reader into its slot on the computer.
2. Replace the two (M2x2.5) screws to secure the smart-card reader in place.
3. Adhere the smart-card reader cable to the touchpad.
4. Connect the smart-card reader cable to the connector on the USH daughter board.
5. Connect the touchpad button cable to the connector on the touchpad.

Next steps

1. Install the 

primary M.2 SSD

.

2. Install the 

inner frame

.

3. Install the 

battery

.

4. Install the 

base cover

.

5. Install the 

SD card

.

6. Follow the procedure in 

after working inside your computer

.

Pegefelt-knap

Removing the Touchpad buttons

Prerequisites

1. Follow the procedure in 

before working inside your computer

.

2. Remove the 

SD card

.

3. Remove the 

base cover

.

4. Remove the 

battery

.

5. Remove the 

primary M.2 SSD

.

6. Remove the 

inner frame

.

About this task

The figure indicates the location of the touchpad buttons and provides a visual representation of the removal procedure.

Adskillelse og samling

53

Summary of Contents for P93F







































































































Reviews: