Removing and installing components
NOTE:
The images in this document may differ from your computer depending on the configuration you ordered.
Recommended tools
The procedures in this document may require the following tools:
●
Phillips screwdriver #0
●
Phillips screwdriver #1
●
Torx #5 (T5) screwdriver
●
Plastic scribe
Screw list
NOTE:
When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE:
Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when
replacing a component.
NOTE:
Screw color may vary with the configuration ordered.
Table 1. Screw list
Component
Secured to
Screw type
Quantity
Screw image
Base cover
Palm-rest and keyboard
assembly
M2x3, Torx 5
8
Battery
Palm-rest and keyboard
assembly
M1.6x2.5
5
Solid-state drive shield System board
M2x3
1
Fans (in computers
shipped with
computers shipped
with 11
th
Generation
Intel Core i3-1115G4
processor)
System board
M1.6x2.5
4
Heat sink (in
computers shipped
with computers
shipped with 11
th
Generation Intel Core
i3-1115G4 processor)
System board
M2x3 (captive)
4
2
8
Removing and installing components
