Dell OptiPlex G1, Service Manual

Page: 86 / 144

5-4 Dell OptiPlex G1 Managed PC Systems Service Manual
)LJXUH$WWDFKLQJWKH2SWLRQDO6WDQGIRU9HUWLFDO2ULHQWDWLRQ
As you lower the stand into place, make sure that the locator pin (see
Figure 5-2) fits into the corner hole of the hole pattern as shown. When the
stand is in place, tighten the thumbscrew.
5RWDWHWKHFRPSXWHUVRWKDWWKHVWDQGLVDWWKHERWWRPDQGWKH
GULYHVDUHDWWKHWRS
To remove the stand, turn the computer over so the stand is at the top, loosen
the screw and lift the stand away, and then place the computer in a horizontal
position.
locator pin
securing
button
captive screw