Figure 37. Removing the optical drive or tape drive blank
Next steps
1.
Install the optical drive cage or tape drive
.
2. If applicable,
.
Installing the optical or tape drive blank
NOTE:
Valid TBU configurations:
●
HBA330 adapter can be connected to TBU and the PERC H740P, H730P, H330, HBA330 can be connected to the drive
backplane.
●
HBA350i adapter can be connected to TBU and the PERC H750, H350, HBA350i can be connected to the drive
backplane.
For more information, see
Prerequisites
1. Follow the safety guidelines listed in
.
2. If applicable,
.
Steps
1. Align the guide on the drive blank with the slot on drive bay.
2. Slide the drive into the slot until the latch snaps into place.
Installing and removing system components
49