Dell Olympus O-T400, Installation And Service Manual, Page: 79 / 117

Figure 65. Installing an expansion card
Next steps
1. Follow the procedure listed in After working inside your system .
2. Install the expansion card holder .
3. Install the air shroud .
M.2 SSD module
Removing the M.2 SSD module
Prerequisites
1. Follow the safety guidelines listed in Safety instructions .
2. Follow the procedure listed in Before working inside your system .
3. Remove the air shroud .
4. Remove the BOSS card.
NOTE: The procedure to remove the BOSS card is similar to the removing an expansion card.
Steps
1. Loosen the screw and lift the retention strap that secures the M.2 SSD module on the BOSS card.
2. Lift the M.2 SSD module and slide it out of the connector on the BOSS card.
78 Installing and removing system components