Dell Olympus O-T400, Installation And Service Manual, Page: 74 / 117

Next steps
1. Follow the procedure listed in After working inside your system .
2. While booting, press F2 to enter System Setup and verify that the system detects the USB memory key.
Expansion card holder
Removing the expansion card holder
Prerequisites
1. Follow the safety guidelines listed in Safety instructions .
2. Follow the procedure listed in Before working inside your system .
3. Remove the air shroud .
Steps
Press the tab and remove the expansion-card holder from the chassis.
Figure 60. Removing the expansion card holder
Next steps
1. Install the air shroud .
2. Follow the procedure listed in After working inside your system .
Installing the expansion card holder
Prerequisites
1. Follow the safety guidelines listed in Safety instructions .
2. Follow the procedure listed in Before working inside your system .
Steps
Align the expansion card holder with the projections on the chassis and push it down until firmly seated.
Installing and removing system components 73