Figure 33. Removing a 2.5-inch drive from a 3.5-inch drive adapter
Next steps
Install a 2.5-inch drive into a 3.5-inch drive adapter
.
Installing a 2.5-inch drive into a 3.5-inch drive adapter
Prerequisites
1. Follow the safety guidelines listed in
.
2.
Remove the 3.5-inch drive adapter from the 3.5-inch hot swappable drive carrier.
Steps
1. Align the screw holes on the 2.5-inch drive with the screw holes on the 3.5-inch drive adapter.
NOTE:
If the hard drive or SSD carrier has Torx screw, use Torx 6 (for 2.5-inch drive) or Torx 8 (for 3.5-inch drive)
screwdriver to install the drive.
2. Using a Phillips #2 screwdriver, secure the 2.5-inch drive to the 3.5-inch drive adapter.
Installing and removing system components
45
