Dell MXG061 Service Manual Download Page 9

Page: 9 / 64

Hard Drive: Dell XPS M1710 Service Manual

file:///C|/Users/santhosh_v.ASIA-PACIFIC/Desktop/Hawke/New%20folder/hddrive.htm[2/21/2014 11:23:27 AM]

Replacing the Hard Drive

NOTICE:

Use firm and even pressure to slide the drive into place. If you use excessive force, you may damage the

connector.

1. Slide the drive into the bay until it is fully seated.

2. Replace and tighten the screws.

3. If you have installed a replacement hard drive, reinstall the Microsoft® Windows® operating system. For instructions,

see "Restoring Your Operating System" in the

Owner's Manual.

Instructions for alternative solutions are available at

support.dell.com/pcrt

4. Reinstall drivers on the new hard drive. For instructions, see "Reinstalling Drivers and Utilities" in the

Owner's Manual.

Instructions for alternative solutions are available at

support.dell.com/pcrt

Returning a Hard Drive to Dell

Return your old hard drive to Dell in its original or comparable foam packaging. Otherwise, the hard drive may be damaged in

transit.

hard drive

foam packaging

Back to Contents Page

Summary of Contents for MXG061

































































Search results

Summary of Contents for MXG061

Reviews:

Related manuals for MXG061

Brands by name

Popular brands

Dell MXG061, Service Manual

Search results

Summary of Contents for MXG061

Reviews:

Related manuals for MXG061

Brands by name

Popular brands